Introductions:
The Alware Advanced 3-axises V2 Camera Mount is a new gyrostabilised Camera Mount designed by Alware. It is made of flash, light and strong fiber glass plates as well as clean anodized CNC Aluminium Rods and high quality Flange Bearings. The unit is designed for full-fit GAUI 330X/ 500X Quadflyer with new ALware Spider Elastic Landing Gear which provides a wider view-angle . It allows you to Tilt, Pan and Roll your camera. This 3 axises camera mount is a perfect platform for your photo, video and certain motion picture cameras in the air with GAUI 330X/500X.

With new ALware Spider Elastic Landing Gear set, your 330X/500X will become more stable and safer when landing on a tough land. This landing gear is designed with elasticity principle. With the Extension Springs, shocks with higher intensity can be reconciled so that the aircraft body as well as the camera will be protected. Except this wonderful benefit, both Cam Stand and the Spider Elastic Landing Gear will lower the CG of the whole 330X/ 500X assembly as a result of a higher stability can be achieved.

The Alware Advanced 3-axises V2 Camera Mount accepts cameras up to the size of the 108*105mm(Wide*High).

Features:
- With New, Simple and Hight Precision designed
- Made of flash, light and strong fiber glass plates as well as CNC Aluminum Rods and high quality Flange Bearings- 3 controllable axises (Can also be simplify to 2-axises mode) by standard small size servos with multiple high quality Flange bearings on each joins.
- High precision of each axises
- Use bottom plate assemble method to the GAUI 330X 500X as to increase the stability of the aircraft in the sky due to lower CG position.
- Relatively large room to mount batteries and varies cameras.
- Easy to assemble.
- Detailed instruction manual can be downloaded easily.

Specification:
Axis: 3 Axis Camera mount(Pan, Tilt, Roll) or Simplify to become a light and simple 2-axises version(Pan and Tilt)
Mounting: Bottom plate assemble method to the GAUI 330X/ 500X
Material: Flash, light and strong fiber glass plates; CNC Aluminum Rods; Hight quality Flange Bearings and Screws set.
Bearing type: Flange bearings
Camera Mount Weight: 191g (with servos);
Spider Elastic Landing Gear: 143g
Landing Gear Height: 170mm
Dimension of portable camera in 3-axises assembly mode: Max. ~108x105mm (HxL)
Dimension of portable camera of 2-axises assembly mode: Max. ~65x106mm (HxL)
Payload Capacity: ~500g
Battery Room (Max height): 40mm
Operate Servo size: Standard small servos such as Align DS410, SAVO SH-0261 etc.
Color: Black fiber plates; Clean Anodized Silver Aluminum Rods. 
Landing Gear: New Alware Spider Elastic Landing Gear (suitable for both GAUI 330X/ 500x), wider viewpoint.
Gyro Stabilization for Camera Mount: Recommended with FY-20A 3-axises Stabilizer/ DJI WooKong M/ GAUI GU-INS GPS build-in Gimbal Function.

Included:
- 1x Alware Advanced 3-axises V2.1 Camera Mount
- 4x Alware PRO3CM Hex Steel Connection Rods (NEW)
- 4x Square Alu Rod 30.5mm Long
- 1x new Alware Spider Elastic Landing Gear Set
- 1x Complete Screw Set
- 3x Servo Linkage Rods with Ball Links
- Metal mounting rod and connectors
( Please be Noted: Servos and Gyro are not included)

Main Differences between the old and the current version:


Instruction Manual for NEW Spider Elastic Landing Gear
Instruction Manual for Advanced 3-axises FB Camera Mount